Unit Test, Malaysia
Manually and Electrical operated Direct/Residual Shear Apparatus
BS 1377, ASTM D3080
– Microprocessor Control
– LCD Display Touch Screen
– Direct Entry Via Touch Sensitive Keyboard
– Rapid Adujustment for Return and Reset
– Fully Variable Speed Range from 0.00001 to 9.99999/minute
– Accept Specimen Up to 100mm square
– Rapid Forward/Reserve 10mm per minute for Fast Setting
– Lever arm ration 10:1
– max. Shear Effort: 10.000N
– RS 232 serial port
– Power: 240V, 50Hz, 1ph
These to determine the shear board, vertical consolidation and horizontal shear movement of the soil specimen that is enclosed withina robust metal box horizontally split into two halves and provided with a vertical plunger.
The Shear Box Apparatus premises the testing of specimens of 60mm, 70mm, 100mm, 2.5″ diameter both square and circular. The speed rate is control by electronic stepper motor that can keep consistent under load stress. A rapid adjustment is also provided and safety limit switch are prevent over strain and overloading of the apparatus. The Shear
Box apparatus is supplied without Shear Box assembly, Load Ring, Vertical/Horizontal of dial gauge and weight set. ( Need to be order separately)
Accessories and part
Shear box 60mm size with 2nos perforated retaining plate, 2nos non-perforated retaining plate, connection pins and 2nos porous disc.
Shear box 100mm size with 2nos perforated retaining plate, 2nos non-perforated retaining plate, connection pins and 2nos porous disc.
Shear box 2.5″ diameter with 2nos perforated retaining plate, 2nos non-perforated retaining plate, connection pins and 2nos porous disc.
50kg slotted weight 4 x 10kg, 1 x 5kg, 2 x 2kg, 1 x 1kg
100kg slotted weight 7 x 10kg, 2 x 8kg, 1 x 5kg, 2 x 2kg, 3 x 1kg, 3 x 500gm, 2 x 250gm
Hollow punch 2.5″ diameter
Hollow punch 60mm square
Hollow punch 100mm square
Tamper tool 2.5″ diameter
Tamper tool 60mm square
Tamper tool 100mm square
Couple of porous disc 2.5″ diameter
Couple of porous disc 60mm square
Couple of porous disc 100mm square
Dial gauge 12mm x 0.002mm, for vertical displacement.
Dial gauge 25mm x 0.01mm, for horizontal displacement.
Load ring 1kN fitted dial gauge 12mm x 0.002mm per division with calibration certificate.
Load ring 2kN fitted dial gauge 12mm x 0.002mm per division with calibration certificate.
Load ring 5kN fitted dial gauge 12mm x 0.002mm per division with calibration certificate
